Storage of gear reducers

The importance of machinery in modern society is self-evident, and as the types of machinery and equipment become more and more diverse, the improvement of the performance of machinery and equipment is particularly important. We should not only learn to use mechanical products, but also know How can we maximize the role of mechanical equipment. When it comes to mechanical equipment, I have to introduce the reducer to you. The normal operation of many mechanical equipment depends on the function of the reducer. The reducer has been recognized by more and more people, and the choice of the reducer material will directly affect its performance. Other editors will not introduce it first. In this article, I will take you to understand the storage knowledge of the gear reducer. , 1. The storage environment is very important. Dryness, ventilation, and no corrosion are the basic requirements. It is also necessary to pay attention to the less ash layer. In addition, it is necessary to pay attention to whether there are other factors that are not suitable or unfavorable for the storage of the gear reducer; 2. The ambient humidity for storage and maintenance of the gear reducer should not be greater than 60%, otherwise the gear reducer equipment will be affected by the environmental humidity; 3. The ambient temperature should not change too much, and the ambient temperature stored at the same time should be controlled between -5°C and 50°C; 4. Avoid direct sunlight or ultraviolet radiation on the gear reducer equipment; 5. It is strictly forbidden to place the gear reducer near corrosive substances, otherwise the equipment will be easily damaged by these corrosive substances; 6. The gear reducer equipment cannot be stacked, but should be placed in a stable position; 7. Apply a small amount of grease on the output shaft of the gear reducer. This maintenance work can prevent the equipment from rusting. The above are some of the things that should be paid attention to when storing the gear reducer. Of course, these precautions are more general. In short, we should also pay attention when storing the R/S/K/F hardened reducer. these matters. Whether it is for the gear reducer or the R/S/K/F hardened reducer, its market sales are relatively good, and because of the improvement of technology, the reducer industry is constantly developing and growing. However, compared with other reducers, the price of R/S/K/F hardened reducer is relatively high, because the control system of R/S/K/F hardened reducer is more advanced, and its material selection The above is also more strict.