Reducer installation precautions

Everyone is very familiar with the reducer, because the reducer is used in many mechanical equipment, and the use of the reducer is very common. Although the use of the reducer is very common, everyone thinks that they can operate the reducer well, but in the process of using the reducer, we still need to pay attention to the installation problem. What are the precautions for installing the reducer? In this article, let's take a look at it. 1. The reducer should be firmly installed on a stable and level base, the oil in the oil drain should be able to be drained, and the cooling air should be circulated smoothly. The foundation is unreliable, causing vibration and noise during operation, and causing damage to bearings and gears. When there are protrusions in the transmission coupling or gears and sprockets are used for transmission, protective devices should be installed. When the output shaft bears a large radial load, the reinforced type should be selected. 2. After the installation is completed, the accuracy of the installation position should be comprehensively checked in order, and the reliability of each fastener should be able to rotate flexibly after installation. The operation should be stable, without shock, vibration, noise and oil leakage. Any abnormality should be eliminated in time. 3. When installing the reducer, attention should be paid to the centering of the transmission center axis, and the error should not be greater than the compensation amount of the coupling used. Good alignment can prolong the service life and obtain the ideal transmission efficiency. The performance of the reducer is very good. If the reducer can be used correctly, it can not only create greater benefits, but also prolong the service life of the reducer. Have you already understood the installation precautions for the reducer introduced by the editor? In the process of using the reducer, you must pay attention to the firm installation of the reducer and smooth operation. There is still a lot of knowledge I want to share with you, but the reason for the limitation of the article will not be introduced. If you are interested, you can pay attention to the website.