Tel
+86.135-8456-7969
News
Location: Home > News > Industry News

Application of reducer in crusher

Source: | Date of issue: 2020-10-15 08:36:54 | Views: 23970

Abstract:

Everyone must have some or less understanding of the reducer, but in fact, the reducer can also be used in the crusher. Do you have any understanding of this? I believe that many readers are familiar with the application of the reducer in the crusher…

Everyone must have some or less understanding of the reducer, but in fact, the reducer can also be used in the crusher. Do you have any understanding of this? I believe that many readers are familiar with the application of the reducer in the crusher. I'm curious. After the reducer is applied in the crusher, it can achieve high-quality operation results, and the reducer plays a very important role in it. The editor will take you to understand the application knowledge of reducer in crusher in this article. The mechanism of the rotary crusher is through the eccentricity between the mandrel and the fixed jaw cylinder, and the resulting space volume becomes smaller and smaller as the mandrel rotates. A set of hydraulic servo device makes the crushing granularity adjustable. This type of crushing is usually suitable for smaller crushing and the crushed material is brittle. The crushing noise is larger than that of jaw crushing, but its structure is more closed, and the dust is stronger than the former. Much smaller and more efficient. The crushing mechanism of the roller crusher is to squeeze and crush large objects through two relatively rotating crushing rollers. Usually, one or two motors are driven by a belt drive to drive one or two reducers. The reducer outputs torque to drive the two crushers. The rollers roll opposite each other, and the rollers are inlaid with tooth shapes. Generally, the tooth shapes are sharper, which makes it easier to break the material when crushing. Through the above introduction, we can make the material crushing simpler and more efficient if the reducer is used in the crusher. The application of the reducer in the crusher is this knowledge, I hope the readers have understood it clearly through reading. The reducer is used in many industries. Its power effect is very high and can meet the high production demand. If you need to buy a reducer, you can contact the online customer service on the official website or call directly.
Related articles
  • 2022-03-10 15:52:45

    With the rapid development of modern production technology, more and more high-tech products have been put into use. The …

  • 2021-12-23 15:55:21

    When there is a problem with the gear, we need to take corresponding methods to deal with it. If it is not serious, then …

  • 2021-11-18 15:56:43

    ZLYJ reducer is a very common transmission device. In the machinery industry, ZLYJ reducer is widely used. The reason why…

  • 2021-10-21 16:27:54

    The role of gear transmission on mechanical equipment is very important, but sometimes there will be problems with gear t…

  • 2021-09-16 08:31:20

    The extrusion compound machine system plays a very important role in production. Although it has a great effect, many use…

  • 2021-08-19 15:57:52

    When using a high-speed mixer, you must follow the correct steps to operate it. If you do not pay attention during the op…

Related products

Copyright 2022 Changzhou Qiling Guorun Transmission Machinery Co., Ltd. All rights reserved Support: Eastnet
Top
  • TEL
  • +86 13584567969
  • +86 18994982535
  • Scan
  • 手机访问