Gravityless mixer reducer

I. Overview:

1. This series of products is driven by a motor, which can realize dual-shaft synchronous external rotation and mixed operation (it can also be customized for synchronous forward and reverse mixed operation according to customer requirements).

2. On the one hand, the reducer using this series of products can save the configuration of a motor, and at the same time, it can save the sprocket, pulley and synchronizing device of the transmission mixer. The structure is compact and the installation space is saved.

3. This series of products is suitable for the mixing of powder and powder, granule and granule, granule and powder and adding a small amount of liquid. It is widely used in chemical industry, dry powder mortar, pesticide, ceramics, food, feed and battery industries. "

2. Features:

1. The material of the box is different according to the size of the specification, which are high-quality gray cast iron and high-quality welded steel. Gear and shaft parts are made of high-strength alloy steel. The gears are processed by carburizing, quenching and grinding. The gear accuracy is GBl0095-88.6. Tooth surface hardness HRC58-62.

2. The reducer is a closed gear box, with small size, stable transmission, low noise and high transmission efficiency.

3. The internal gears of the reducer are all lubricated by splashing, and the gear pump forced lubrication system is used to lubricate the bearings and bevel gears of the high-speed shaft part, which ensures the long-term reliable operation of the reducer.

4. Standard parts such as bearings and oil seals are selected from domestic brands, and imported brands can also be selected according to customer needs.

3. Relevant parameters of the reducer:

The model of the reducer:

installation, use and maintenance

1. The reducer adopts a hollow shaft set with fixed feet. It is strictly forbidden to hammer the output shaft of the reducer during installation;

2. The reducer is not lubricated when it leaves the factory, please add lubricating oil before use;

3. Usually, after 3000 hours or half a year of use, the oil quality and oil level should be checked, and new lubricating oil should be replaced after one year of use. The brand of the replacement lubricating oil is Kunlun lubricating oil L-CKC220 or other brands of lubricating oil with the same performance, and the amount of refueling is shown in the table below;

Note: The amount of refueling is for reference only. Please refer to the oil level on the oil mark for actual refueling.