K series helical-spiral bevel gear reducer

I. Overview:

1. This series of reducers is designed and manufactured on the basis of the modular combination system, and there are many motor combinations, installation forms and structural schemes. The transmission ratio is finely divided and has a wide range, and the combined model can form a large transmission ratio. It can meet different working conditions and has superior performance.

2. This series adopts an integral casting box, which has good structural rigidity and is easy to improve the strength of the shaft and the life of the bearing. The key components of this series of hard-tooth surface gears are made of high-quality alloy steel, the surface is carburized and quenched and hardened, and the teeth are finely ground. The transmission is stable, the noise is low, and the bearing capacity is large. Low temperature rise and long life.

3. It can be used for forward and reverse rotation, bear large radial load, and can bear axial load not greater than 15% of radial force. It is widely used in metallurgy, sewage treatment, chemical, pharmaceutical and other industries.

2. Features:

1. The output shaft of this series is perpendicular to the input shaft, and the transmission part is composed of two-stage helical gears and spiral bevel teeth.

2. Installation method: solid output shaft and foot type installation (K type), hollow output shaft and shaft installation (KA type), solid output shaft and B5 flange type installation (KF type), hollow output shaft and B5 Flange Mounting (KAF Type), Hollow Output Shaft and B14 Flange Mounting (KAZ Type), Add Anti-Rotation Arm Mounting to KA Type (KAT Type), Hollow Output Shaft and K Type Box Mounting (KAB type). The installation position is not limited and it is easy to choose.

3. The efficiency of a single model is not less than 95%.

4. Low noise: The main parts of the reducer have been precisely machined and carefully assembled and tested, so the noise of the reducer is low.

5. Long service life: Under the conditions of correct selection (including selection of appropriate service factor) and normal use and maintenance, the life of the main components of the reducer (except wearing parts) is generally not less than 20,000 hours. The wearing parts include lubricating oil, oil seals and bearings.

3. The model and related parameters of the reducer:

4. Input power and allowable torque: