Tel
+86.135-8456-7969
News
Location: Home > News > Company News

Reasons for oil leakage in the reducer oil tank of the no-gravity mixer

Source: | Date of issue: 2020-12-24 16:03:58 | Views: 23950

Abstract:

In recent years, the reducer has played an important role in the industry. After the reducer has been updated, the performance has become more comprehensive. Now there are many types of reducers available on the market. The weightless mixer reducer is…

In recent years, the reducer has played an important role in the industry. After the reducer has been updated, the performance has become more comprehensive. Now there are many types of reducers available on the market. The weightless mixer reducer is a relatively new type of reducer, which has been recognized since it was used. However, the unavoidable defect of the weightless mixer reducer is that there is oil leakage in the fuel tank. In this article, the editor will take you to understand the reasons. 1. When the reduction gear box is working, the friction generated by the meshing of each pair of gears in the box will emit heat, and with the increase of the operation time of the reduction gear box, the temperature in the reduction gear box box will rise, the gas will expand, and the The volume remains unchanged. If the vent cap on the top of the box is not opened, the thermal expansion air in the box can be freely discharged to maintain the pressure balance inside and outside the box, otherwise the lubricating oil will leak along the sub-box surface or other gaps such as shaft extension seals. 2. The structure design of the reduction gear box is unreasonable, and there is no ventilation cap. The inspection hole cover is too thin, the joint surface is uneven, and oil leaks from the contact gap; during the manufacturing process of the reduction gear box, the castings are not annealed and aged, and after deformation, the oil will be exposed from the generated gap; In the oil return tank, the lubricating oil will accumulate in the shaft seal, end cover, joint surface, etc. Under the action of the pressure difference, the lubricating oil will leak from the gap. These are the reasons that may cause oil leakage in the reducer oil tank of the weightless mixer. You can understand that when there is an oil leakage, you can simply judge which cause is caused, so that you can quickly know the solution. direction. What else do you want to know, you can leave a message to the editor, and the editor will answer it for you. There are still many brands of weightless mixer reducer. There are many advantages to choose a large brand of weightless mixer reducer.
Related articles
  • 2022-03-10 15:52:45

    With the rapid development of modern production technology, more and more high-tech products have been put into use. The …

  • 2021-12-23 15:55:21

    When there is a problem with the gear, we need to take corresponding methods to deal with it. If it is not serious, then …

  • 2021-11-18 15:56:43

    ZLYJ reducer is a very common transmission device. In the machinery industry, ZLYJ reducer is widely used. The reason why…

  • 2021-10-21 16:27:54

    The role of gear transmission on mechanical equipment is very important, but sometimes there will be problems with gear t…

  • 2021-09-16 08:31:20

    The extrusion compound machine system plays a very important role in production. Although it has a great effect, many use…

  • 2021-08-19 15:57:52

    When using a high-speed mixer, you must follow the correct steps to operate it. If you do not pay attention during the op…

Related products

Copyright 2022 Changzhou Qiling Guorun Transmission Machinery Co., Ltd. All rights reserved Support: Eastnet
Top
  • TEL
  • +86 13584567969
  • +86 18994982535
  • Scan
  • 手机访问